Welcome to our new website!
↓Overview
↓Roundabouts
↓Pedestrian crossovers (PXOs)
↓Stay alert and know your role
The Town of Milton is committed to keeping pedestrians safe. We use a variety of crossings so that pedestrians can move safely through our town.
It is always important for pedestrians to be aware of traffic, follow the rules of the road, and take steps to be seen. Please also use pedestrian crossings whenever available to reduce risks and improve road safety.
Learn more about being a safe pedestrian below.
Roundabouts improve traffic flow and reduce collisions.
Pedestrians must cross only at marked crosswalks.
Push the pedestrian button if present.
Step to the curb and wait for a safe gap.
Make eye contact with drivers before crossing.
Wait on the splitter island if needed.
A pedestrian crossover (PXO) is a designated mid-block crossing where pedestrians can safely cross the road without jaywalking.
PXOs are marked, with signs, pedestrian-activated push buttons, and flashing lights at some locations.
Pedestrians must activate lights when available and cross only when vehicles have completely stopped. Drivers and cyclists must stop and remain stopped until the pedestrian has completely crossed the road. Cyclists must dismount and walk bikes through the crossing.
Failing to obey may result in a fine and three demerit points.
Overhead flashing beacons (Type 2 Level B)
Overhead flashing beacon PXOs are highly visible and are typically used at busier locations. Signals are mounted above the roadway to increase visibility for approaching drivers.
Features include:
Marked crossing area
Designated stopping area for vehicles and cyclists
Roadside signs
Button-activated rectangular rapid flashing beacons
Overhead signage
Side-mounted flashing beacon (Type 2 Level C)
Side-mounted flashing beacon PXOs are installed at the side of the road and provide clear visual cues to approaching drivers.
Features include:
Marked crossing area
Designated stopping area for vehicles and cyclists
Roadside signs
Button-activated rectangular rapid flashing beacons
Painted, no beacons (Type 2 Level D)
Painted PXOs are used on lower-volume roads and rely on pavement markings and signage rather than flashing signals.
Features include:
Marked crossing area
Designated stopping area for vehicles and cyclists
Roadside signs
Whether you are walking, driving, or cycling, staying alert and understanding how crossings work helps keep everyone safe.
Always follow posted crossing signals and signage
Watch for pedestrians entering or waiting at crossings
Reduce speed and be prepared to stop
Make eye contact with the driver/pedestrian/cyclist when possible to confirm intent
Being aware of your surroundings and following the rules of the road helps reduce risk and improve safety for all road users.
