Welcome to our new website!
Milton Transit allows riders to bring bicycles on buses using front-mounted bike racks. This service supports combining cycling and public transit for travel within the community. All buses are equipped with bike racks, and there is no additional cost to use them.
This page explains how to use the bike racks and outlines important guidelines to follow before and during your trip.
Bike racks are located on the front of all Milton Transit buses. You are responsible for loading and unloading your bicycle. Review the instructions below before using the bike rack. Detailed step-by-step guidance is provided on each rack.
Loading and securing your bike
Follow these steps to safely secure your bicycle:
Wait for the bus to come to a complete stop.
Tell the bus operator you will be loading your bike.
Lower the rack by squeezing the handle.
Lift your bike onto the rack and place it in the tire grooves closest to the bus.
Pull the support arm up and over the front tire to secure the bike.
Board the bus.
Check your bike as needed during your trip.
Follow these steps to safely remove your bicycle:
Exit the bus from the front door and tell the bus operator you will be unloading your bike.
Approach the rack from the curb side and lower the support arm.
Lift your bike out of the tire grooves. If no other bikes remain, fold the rack up and secure it.
Move your bike to the sidewalk.
Let the bus operator know you have finished unloading.
Follow these guidelines when using bike racks:
Children under 12 years of age must be accompanied by an adult
Racks are available on a first-come, first-served basis
Each rack can hold a maximum of two bicycles
Remove loose items such as water bottles, saddlebags, or carriers before loading your bike
The bus operator will determine whether a bicycle can be safely loaded onto the rack.
The following items are not allowed on bike racks:
Tricycles, tandems, scooters, motorized bikes, e-bikes, and e-scooters
Bicycles with locks or chains attached to the rack
Bicycles with large carriers or accessories that may not fit safely
If the bike rack is already in use, you may be able to bring your bicycle on board if all the following conditions are met:
The bus is low-floor (wheelchair accessible)
The accessible area is not occupied
The bus operator determines it is safe
Milton Transit is not responsible for loss, damage, or theft of bicycles. Access to bike racks may be refused at any time due to safety concerns or operational needs.
Cyclists are responsible for securing their bicycles. The Town of Milton is not responsible for damage caused by or to bicycles, or for stolen bicycles.